Search Results
794 Products for "6-22 impact driver"
Filter
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Stud holders (M6-1/4" - M12-1/2"), designed to be paired with studs for Hilti's cordless stud fusion system
No technical data available
- Description
- Ground rod driver for grounding and earthing applications using a demolition hammer
- Diameter range
- 1/2 - 3/4 in
- Description
- Gas nailer for insulation fastening on soft and some tough concrete and cold formed steel studs (insulation board thickness 25-150 mm| 1" – 5 7/8")
- Fastener Intake
- Single
- Fastener length range
- 0.98 - 5.91 in
- Power source type
- GC 52 Gas can
- Description
- Cordless drill for predrilling accurate holes for X-BT fasteners
- Application
- [consumable dependent]
- RPM
- 4000 rpm
- Max. torque
- 2 ft-lbs
- Description
- Replacement pulley wheels for Hilti wire saws
- Accessory type
- Pulley wheels
Nuron
- Description
- 15 liter (8 gallon) dust extractor tank with wheels and push bar, compatible with VC 4X-22 cordless dust extractors (wet & dry)
- Dust capacity
- 36 lb
- Application
- Cleaning, Drilling and breaking, Wood sawing, Cutting and grinding (light, up to 125 mm / 5 in), Drywall and wood sanding, Wet coring, Socket cutting
- Power source
- n/a
- Description
- Replacement pulley wheels for Hilti wire saws
- Accessory type
- Pulley wheels
- Description
- Electric wall saw for tough cutting jobs with cut assistance and on-board control electronics (no external e-box)
- Motor power
- 20 kW
- Blade diameter - range
- 23-5/8 - 63 in
- Min. generator power
- 40 kVA
- Description
- Fully automatic, high-productivity, compact powder actuated tool for fastening collated nails
- Dimensions (LxWxH)
- 15.9 x 2.2 x 6.5 in
- Weight
- 5.4 lb
- Fastener Intake
- Collated
- Description
- Green beam combi-laser with 2 lines and 4 points for plumbing, leveling, aligning and squaring
- Accuracy
- ±0.12 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Maximum operating time
- 8 h
- Description
- Green beam combi-laser with 2 lines and 4 points for plumbing, leveling, aligning and squaring (12V battery platform)
- Accuracy
- ±0.12 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Maximum operating time
- 33 h
- Description
- Long-neck random orbital drywall sander with variable-speed brushless motor and dust extraction (supplied with bag and extension pole)
- Sanding plate diameter
- 8.86 in
- Weight according EPTA-Procedure 01/2003 without battery
- 7.7 lb
- Speed of oscillation - range
- 4000 - 8000 rpm
- Description
- Accessories for cordless drill drivers/screwdrivers on the Nuron battery platform
- For use with
- SD 5000-22, SF 4-22, SF 4H-22, SF 6-22, SF 6H-22, SID 6-22, SIW 6-22, SIW 8-22
- Description
- Accessories for cordless drill drivers/screwdrivers on the Nuron battery platform
- For use with
- SIW 4AT-22, SIW 6-22
- Description
- Accessories for cordless drill drivers/screwdrivers on the Nuron battery platform
- For use with
- SIW 6-22
- Description
- Four or more tools cordless combos
No technical data available
- Description
- Angle grinder with long-lasting carbon brush and side switch, for cutting and grinding with discs 4.5" up to 5"
- Disc diameter
- 5 in
- Weight according EPTA-Procedure 01/2003 without battery
- 5.5 lb
- Max. cutting depth
- 1.34 in
- Description
- Ground rod driver for grounding and earthing applications using a demolition hammer
- Diameter range
- 1/2 - 3/4 in
- Description
- High-precision green beam combi-laser with 2 lines and 4 points for plumbing, leveling, aligning and squaring
- Accuracy
- ±0.08 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Maximum operating time
- 8 h
- Description
- Replacement pulley wheels for Hilti wire saws
- Accessory type
- Pulley wheels
- Description
- Fully automatic, high-productivity, compact powder actuated tool for mechanical and electrical fastenings
- Dimensions (LxWxH)
- 15.9 x 2.2 x 6.5 in
- Weight
- 4.9 lb
- Fastener Intake
- Single
- Description
- Compact but powerful diamond coring machine for rig-based concrete coring from 25-202 mm (31/32 - 7-15/16”) in diameter
- Diameter range
- 31/32 - 7-15/16 in
- Drilling stand
- Baseplate dimensions and system weight based on usage of SFL stand
- Base material
- Concrete
- Description
- Screw guide for the ST 1800 screw driver – for fastening sandwich panel screws
- Length
- 5.3 in
- Screw diameter d
- 0.22 in
- Screw length - min
- 2.17 in
- Description
- Circular saw for heavy-duty straight cuts up to 2-3/8" depth with a 7.25" blade
- Max. cutting depth
- 2.64 in
- Blade diameter - range
- 7-1/4 - 7-15/32 in
- Cutting depth at 45 degrees
- 1-13/16 in
- Description
- Replacement pulley wheels for Hilti wire saws
- Accessory type
- Pulley wheels
- Description
- Dry electric hand-held diamond cutter – cutting depth up to 85 mm with 230 mm blade
- Disc diameter
- 9 in
- Cutting depth
- 3 in
- No load RPM
- gear 1: 6500 rpm
- Description
- Versatile and powerful SDS Max (TE-Y) rotary hammer for concrete drilling and chiseling, with Active Vibration Reduction (AVR)
- Weight according EPTA-Procedure 01/2003 without battery
- 15 lb
- Single impact energy
- 5.8 ft-lbs
- Hammer drilling diameter range
- 15/32 - 3-15/16 in
- Description
- Powerful SDS Max (TE-Y) demolition hammer for heavy-duty chiseling in concrete and masonry, with Active Vibration Reduction (AVR)
- Working direction
- Wall
- Tool chuck type
- TE-Y (SDS Max)
- Weight according EPTA-Procedure 01/2003 without battery
- 17.4 lb
- Description
- Fully automatic powder actuated, high-productivity and compact tool for attaching ceiling fasteners to concrete or steel
- Dimensions (LxWxH)
- 21.5 x 2.2 x 6.5 in
- Weight
- 6 lb
- Fastener Intake
- Single
- Description
- Versatile and powerful SDS Max (TE-Y) rotary hammer for concrete drilling and chiseling, with Active Vibration Reduction (AVR) and Active Torque Control (ATC)
- Weight according EPTA-Procedure 01/2003 without battery
- 17.2 lb
- Single impact energy
- 5.8 ft-lbs
- Hammer drilling diameter range
- 15/32 - 3-15/16 in
- Description
- Compact top-handle gas saw (63cc) with blade brake, for cutting up to 4-3/4" with 12" blades in concrete, masonry, and metal
- Motor cylinder
- 63.3 cm³
- Rated power
- 3.2 kW
- Wet or dry operation
- Wet and Dry
- Description
- Optical level for everyday leveling tasks with 20x magnification
- Magnification
- 20 x
- Compensator type
- Air-damping
- IP protection class
- IP 55 (EN 60529)
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Hex bit holder – locking chuck for standard hex bits
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Right-angle drill driver adapter – gives you additional reach when working with limited clearance
- Description
- Exchangeable chuck/adapter to simplify drilling and screwdriving in tight spaces using the SFE 2-A12 multi-head drill driver
- For use with
- SFE 2-A12
- Product information
- Offset chuck – you can drive screws straight-on with only 10 mm clearance from an adjacent surface
- Description
- Tester for proof loading and determination of pullout resistance of anchors and DX fasteners
No technical data available
- Description
- Semi-automatic powder actuated tool for fastening single nails in medium-duty applications on both concrete and steel
- Dimensions (LxWxH)
- 13.6 x 2 x 6.2 in
- Weight
- 5.3 lb
- Fastener Intake
- Single
- Description
- Gas nailer for insulation fastening on soft and some tough concrete and cold formed steel studs (insulation board thickness 25 – 200 mm | 1" – 7 7/8")
- Fastener Intake
- Single
- Fastener length range
- 0.98 - 7.87 in
- Power source type
- GC 52 Gas can
- Description
- Advanced heavy-duty diamond drilling tool with optional Cut Assist autofeed unit for coring very small to large diameter holes of 12-500 mm (1/2" - 20”)
- Diameter range
- 15/32 - 19-11/16 in
- Base material
- Concrete, Reinforced concrete, Asphalt
- Operation mode
- Rig-based drilling system
- Description
- Variable speed angle grinder with slide switch for cutting and grinding in metal, concrete, and masonry with discs up to 5”
- Disc diameter
- 5 in
- No load RPM
- gear 1: 3000 rpm; gear 2: 4000 rpm; gear 3: 5000 rpm; gear 4: 6000 rpm; gear 5: 7500 rpm; gear 6: 9400 rpm
- Trigger type
- Constant on
- Description
- Powerful corded angle grinder with dead man’s switch for cutting and grinding in metal, concrete, and masonry with discs up to 5” (14-amp)
- Disc diameter
- 5 in
- No load RPM
- gear 1: 9400 rpm
- Trigger type
- Paddle with deadman
- Description
- Multi-line laser with 3 green 360° lines for plumbing, leveling, aligning and squaring
- Accuracy
- ±0.12 in at 33 ft
- Max. operating distance (diameter)
- 131 ft (lines), 328 ft (lines, with receiver)
- Self leveling range at room temperature
- -4.0/ +4.0° °
- Description
- Three-phase heavy-duty diamond coring machine with high-frequency motor and optional auto-feed unit for rig-based concrete coring from 82-600 mm (3-7/32 - 23-5/8”) in diameter
- Diameter range
- 3-7/32 - 23-5/8 in
- Base material
- Concrete, Reinforced concrete
- Operation mode
- Rig-based drilling system
- Description
- Customized screwdriver bits for Hilti screw fastening systems
- Connection end
- Hexagonal
- Description
- Short-stroke gas nailer for drywall track
- Tool body weight
- 8.2 lb
- Fastener Intake
- Collated
- Fastener length range
- 0.55 - 1.54 in
- Description
- Gas nailer with single power source for drywall track, electrical, mechanical and building construction applications
- Dimension (L x W)
- 436 x 132 mm
- Tool body weight
- 8.8 lb
- Fastener Intake
- Collated
- Description
- Easy-to-use laser meter for distance and area measurements up to 60 m / 200 ft
- Measuring range
- 8 in - 197 ft
- Measurement accuracy
- 1.5 mm
- Measuring functions
- Single and continuous measurement
- Description
- Versatile breaker for demolishing or chiseling floors and occasional wall applications (with universal power cord)
- Working direction
- Floor, Wall
- Tool chuck type
- TE-S
- Weight according EPTA-Procedure 01/2003 without battery
- 27.6 lb
- Description
- Very powerful dust extractor for connection with power tools and jobsite clean ups (wet & dry), 60l tank - OSHA compliant with 300 CFM
- Water capacity
- 13 gal (US)
- Container capacity
- 60 l
- Dust capacity
- 159 lb
- Description
- Professional-performance screwdriver bit with torsion zone and holding function for better sticking in soft joint applications
- Connection end
- 1/4 in Hex shank
- Description
- Ultimate SDS Plus (TE-C) hammer drill bit for anchor drilling into reinforced concrete (metric)
- Connection end
- TE-C (SDS Plus)
- Base material
- Reinforced concrete, Concrete, Brick, Masonry
- Working mode
- Hammer drilling
- Description
- Setting tools and accessories for the Kwik-Con + and Kwik-Con II+ screw anchors
- Material, corrosion
- N/A
- Head configuration
- N/A
- Material composition
- N/A
standard
- Description
- Collated nails for fastening to concrete and other base materials using the GX 120 gas nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Customized nut setter for Hilti decking screw fastening systems
- Connection end
- 1/4 in Hex shank
- Description
- Professional-performance screwdriver bit with torsion zone for soft joint applications
- Connection end
- 1/4 in Hex shank
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (sherardized steel)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- PROFIS Software
- No
- Description
- Sanding discs for DWS 225 long-neck drywall sanders
- Base material
- Drywall, Gypsum, Wood
- Description
- Heavy-duty reciprocating saw blade for demolishing wood containing nails – extra-strong in metal, fast in wood
- Product Class
- Premium
- Shank
- 1/2 in universal shank
- Teeth per inch
- 6