Search Results
822 Products for "6-22 impact driver"
Filter
- Description
- Stainless steel (A4) channel foot for fastening channels to various base materials
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089
- Material composition
- Steel - DIN EN ISO 7089
- Surface finish
- Outdoor Coated - HDG
- Load range
- Light duty
premium
- Description
- Steel washers for use with nails
- Application
- Water proofing, Fasten plastic, netting, etc., Wire mesh
- For use with (tools)
- BX 3, GX 120, GX 3
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Ultimate-performance heavy-duty expansion stud anchor with approvals for safety-relevant applications in concrete (carbon steel, external thread)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Seismic
- Description
- Standard core bit for coring in all types of concrete – for all tools
- For use with
- DD 130, DD 150-U, DD 160, DD 200, DD 250-CA, DD 350-CA
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Low-pressure foam for air-sealing, filling and insulating doors and windows without warping the frames or jambs
- Foam Yield (up to)
- 1.3 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 10 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 15 min
- Description
- Charging adapter for 12V batteries on C4/36 chargers
- Charger compatibility
- C 4/36-90, C 4/36-350, C4/36-DC, C 4/36-MC4, C 4/36, RC 4/36, RC 4/36-DAB
- Dimensions (LxWxH)
- 5.3 x 3.7 x 2.1 in
- Weight
- 0.4 lb
- Description
- Tool bags for storing and carrying chisels up to 50 cm (20") long
- Connection end
- TE-S
- Application
- n/a
- For use with
- All Hilti chisels up to length 50cm
standard
- Description
- Diamond core bit for hand-held drilling machines
- For use with
- DD 110-D, DD 150-U
- Base materials
- Masonry
- Drilling Mode
- Hand-held
- Description
- Premium core bit for coring in all types of masonry – for <2.5 kW tools
- For use with
- DD 110-D, DD 110-W, DD 130, DD 150-U
- Base materials
- Masonry
- Drilling Mode
- Hand-held, Rig-mounted
- Description
- Ultimate Carbide Wood Hole Saw for cutting wood and nail embedded wood (arbor sold separately)
- Base material
- Wood
- Working mode
- Drilling
- Connection end
- Hex shank, 7/16 in hexagonal
- Description
- High-performance wedge anchor with everyday approvals for uncracked concrete (hot-dip galvanized)
- Material, corrosion
- Carbon steel, HDG (Hot-Dip Galvanized)/Sherardized
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete)
- Description
- Pathway device for high-traffic cabling with optimal airflow control
- Product Class
- Ultimate
- Application temperature range
- 23 - 122 °F
- Storage and transportation temperature range
- 23 - 122 °F
- Description
- Sealing for the DD-WC-ML water dam for core bit diameters from 24 mm (15/16") to 250 mm (9-13/16")
- Accessory type
- Sealing washers
- For use with
- DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA
- Description
- Self-adhesive discs of firestop putty for single cables, conduits and bundles in openings up to 1"
- Approx. Density
- 1.6 g/cm³
- Color
- Red
- Surface burning characteristics UL 723 (ASTM E84)
- Flame spread: 0<BR>Smoke development: 5
- Description
- Ultimate wall saw blade (20kw) for high speed and a long lifetime in reinforced concrete (H1" Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Ultimate wall saw blade (20kw) for high speed and a long lifetime in reinforced concrete (P1" Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
New
ultimate
- Description
- Ultimate wall saw blade (20kw) for high speed and a long lifetime in reinforced concrete (60H Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
premium
- Description
- Premium auger bit for fast, smooth drilling of deep holes in wood
- Connection end
- 7/16 in hexagonal
- Base material
- Wood
- Product Class
- Premium
- Description
- High-performance anchor rod for HVU2 adhesive capsules and injectable adhesive hybrid/epoxy mortars (304 stainless steel)
- Material, corrosion
- Stainless Steel, 304
- Base materials
- Concrete (cracked), Concrete (uncracked), Masonry (hollow), Masonry (solid)
- PROFIS Software
- Yes
- Description
- Prisms and reflectors for construction total stations
- For use with (local pick)
- PLT 300
- Description
- Tripod accessory for all our line lasers
- Additional Accessory Information
- Compact tripod with 1/4” thread, extendable up to 1.2 m and fits neatly within the case PMA 62. The user is able to set up the system quickly anywhere on the jobsite.
- Product information
- Compact tripod with 5/8” thread, including an adaptor for adjusting threads from 5/8" to 1/4", extendable up to 1.2 m allows the user to set up the system quickly anywhere on the jobsite.
- For use with (local pick)
- PM 20-CG, PM 2-L, PM 2-LG, PMC 46, PM 30-MG, PM 40-MG, PM 4-M, PM 20-CG 12V
- Description
- Tripods and measuring rods compatible with rotating lasers
- Additional Accessory Information
- Tripod with 5/8" thread, height can be adjusted between 1.00 m and 1.68 m, metal tripod head, self-locking tripod legs, weight 3.6 kg
- Product information
- Tripod with 5/8" thread, self-locking legs, weight 3.6 kg
- For use with (local pick)
- PR 4-22, PR 40-22, PR 40G-22, PR 400-22,
- Description
- Ultimate wall saw blade (20kw) for high speed and a long lifetime in reinforced concrete (1-3/8" Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Ultimate wall saw blade (20kw) for high-speed cutting and a longer lifetime in reinforced concrete (P1" Arbor)
- Base material
- Concrete, Concrete (reinforced)
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Ultimate wall saw blade (20kw) for high-speed cutting and a longer lifetime in reinforced concrete (K1" Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Ultimate-performance removable heavy-duty wedge anchor with approvals for fire, seismic and cracked concrete (A4 stainless steel, hex head)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Hex head
- Approvals / Test reports
- ICC-ES report (concrete)
- Description
- Ultimate wall saw blade (20 kW) for high-speed cutting and a longer lifetime in reinforced concrete (H1" Arbor fits on Hilti wall saws)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Ultimate wall saw blade (20 kW) for high-speed cutting and a longer lifetime in reinforced concrete (60H Arbor fits on Hilti wall saws)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
- Description
- Outdoor coated (OC) pipe shoe with height and slope adjustability for heavy industrial applications with outer pipe diameters of 217-610 mm (8" to 24")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Bows: S235JR - DIN EN 10025, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
standard
- Description
- Premium collated nails for fastening to concrete using powder-actuated tools
- Base materials
- Concrete (soft), Masonry (solid limestone brick)
- Minimum thickness of base material (concrete)
- 80 mm
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Collated exterior sheathing screw (corrosion-resistant coating) for SD-M 1 or SD-M 2 for fastening exterior sheathing boards to metal
- Screw head type
- Bugle head
- Screw drive/recess type
- PH #2
- Collated
- Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine
- Description
- Vertical fiberglass bracket - Large
- Material composition
- Polyamide, EN AW-6063 T66
- Width
- 62 mm
- Height
- 150 mm
- Description
- Ultimate wall saw blade (20kw) for high-speed cutting and a longer lifetime in reinforced concrete (1-3/8" Arbor)
- Base material
- Concrete, Concrete (reinforced), Abrasive concrete
- Segment type
- Equidist
- Wet or dry operation
- Wet
New
standard
- Description
- Premium collated nails for fastening to concrete and other base materials using the BX 4 cordless nailer
- Base materials
- Concrete (soft), Masonry (solid limestone brick), Masonry (grout filled concrete block)
- Minimum thickness of base material (concrete)
- 2-3/8 in
- Environmental Conditions
- Dry indoor
- Description
- Duplex coated grating fastener disc for fixing floor grates with threaded studs in mildly corrosive environments
- Application
- Grating
- Approvals
- ABS, BV, DNV GL, LR
- For use with (tools)
- DX 351
- Description
- Stainless steel grating fastener disc for fixing floor grates with threaded studs in highly corrosive environments
- Application
- Grating
- Approvals
- ABS, BV, DNV GL, LR
- For use with (tools)
- BX 3, DX 351
- Description
- Pipe shoe with weldable pipe interface and height and slope adjustability in heavy industrial applications with outer pipe diameters of 21-328 mm (1/2" to 12")
- Fire resistance ( Yes/No)
- No
- Temperature resistance
- -4 - 572 °F
- Material composition
- Base-plate: S280GD / Modif POSMAC-C, Middle-plate: S235JR - DIN EN 10025, Sliding-plate: PA66 + GF30, Bolt: Steel grade 8.8, Nut: Steel grade 8
- Description
- Re-usable nozzle foam ideal for sealing, filling and insulating gaps and cracks
- Foam Yield (up to)
- 0.8 ft³
- Approx. tack free time (at 74°F / 50% rel. humidity)
- 8 min
- Approx. cut time (at 23°C / 50% rel. Humidity)
- 30 min
- Description
- Tool for roughening smooth diamond cored-holes in concrete
No technical data available
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (stainless)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (stainless steel)
- Material, corrosion
- Stainless steel, A4
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
premium
- Description
- Ultimate-performance collated nails for fastening to steel using the GX 3 gas nailer
- Base materials
- Steel
- Minimum thickness of base material (steel)
- 3/16 in
- Corrosion protection
- Galvanized zinc coated <20 µm
- Description
- Duplex coated narrow grating fastener disc for fixing narrow-mesh floor grates with threaded studs in mildly corrosive environments
- Application
- Grating
- For use with (tools)
- DX 460, DX 5, DX 6
- Corrosion protection
- Duplex coating equivalent to 45 µm hot dipped galvanized
- Description
- Stainless steel narrow grating fastener disc for fixing narrow-mesh floor grates with threaded studs in highly corrosive environments
- Application
- Grating
- For use with (tools)
- DX 460, DX 5, DX 6
- Corrosion protection
- Equivalent to A4 (316) stainless steel
New
- Description
- Hard-sided carrying case for storing and transporting your Hilti angle grinder or sander and its accessories
- Types
- Individual tool cases
- Description
- Remote/receivers and holders for your Hilti PR rotating lasers
No technical data available
ultimate
- Description
- Self-sharpening Hex 28 flat chisel bits for precision demolition of concrete and masonry
- Connection end
- HEX 28
- Width
- 1.5 in
- Product Class
- Ultimate
![[TEC:Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).][TET:Products in this group use a Hilti TE-T type connection end (commonly called SDS-Top).][TEY:Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).][TES:Products in this group use a Hilti TE-S type connection end.][HEX:Products in this group use a HEX 28 type connection end.]](https://productdata.hilti.com/APQ_HC_f300/H28_V1_PDP.jpg)
- Description
- Continuous bag tank with wheels and push-bar for use with VC-20/40/150-X dust extractors (dry)
- Dust capacity
- 71 lb
- Application
- Cleaning, Drilling and breaking, Wood sawing, Cutting and grinding (light, up to 125 mm / 5 in), Drywall and wood sanding, Socket cutting, Slitting, Cutting and grinding (heavy, above 125 mm / 5 in)
- Power source
- n/a
- Description
- High-performance wedge anchor with everyday approvals for uncracked concrete (316 stainless steel)
- Material, corrosion
- Stainless Steel, 316
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1)
- Description
- Ultimate-performance collated nails for fastening to steel using powder-actuated tools
- Base materials
- Steel
- Minimum thickness of base material (concrete)
- 80 mm
- Minimum thickness of base material (steel)
- 1/4 in
- Description
- Cast-in anchor channels with upgraded load capacity and multiple embedment depths for economical fastening of curtain wall façades
- Material, corrosion
- Carbon Steel, Hot-Dip Galvanized
- PROFIS Software
- Yes
- Product type
- Anchor channel
- Description
- Modules to seal cables/pipes within a transit frame when high water- and gas-tightness and fire-resistance are required
- Approvals
- UL
- Temperature resistance range
- -40 - 122 °F
- Free from
- Halogen (halogen content <= 0.1 weight %)
- Description
- Ultimate core bit for coring in all types of concrete – for <2.5 kW tools
- For use with
- DD 120, DD 130, DD 150-U, DD 160
- Base materials
- Concrete
- Drilling Mode
- Rig-mounted
- Description
- Standard, flush, and dry flanges for the second generation DST 10-CA wall saw and DST 20-CA 2nd wall saw
- Accessory type
- Flanges
- Description
- Ultimate SDS Max (TE-Y) hollow drill bit for virtually dust-free drilling in concrete
- Connection end
- TE-Y (SDS Max)
- Base material
- Reinforced concrete, Concrete
- Working mode
- Hammer drilling
- Description
- Ultimate-performance through-set undercut anchor for dynamic loads (zinc-plated)
- Material, corrosion
- Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic
- Description
- Ultimate-performance pre-set undercut anchor for dynamic loads (zinc-plated)
- Material, corrosion
- Carbon steel, zinc-plated, Zinc plated (min. 5 microns)
- Head configuration
- Externally threaded
- Approvals / Test reports
- ICC-ES report (concrete), LABC, Nuclear (NQA-1), Seismic