Search Results

819 Products for "MT-B-LDP"

MFT-SZ 20 Rail

Description

Horizontal rail for installation of cassettes

Material composition

EN AW-6063 T66

CP P/M 680 Lids

Description

Caps to cover firestop cast-in devices

_{No technical data available}

X-BW MC Batwing

premium

Description

Batwing hanger for attaching single MC/AC cables, EMTs and rigid conduits to drop rods, wires or beam flanges

Application

Conduit Fastening, Cable Fastenings

Material

Carbon steel

Base materials

Concrete

X-ECH MX Cable holder

premium

Description

Plastic bunched cable holder for use with collated nails

Application

Conduit Fastening, Cable Fastenings

Material

Carbon steel

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

HBC-T Serrated T-bolts

Description

Serrated T-bolts for tension, perpendicular and parallel shear loads (3D loads)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

Compatible Anchor Channel

HAC-T50, HAC-T70, HAC-30

Channel profile

HAC-V-T 50, HAC-V-T 70, HAC-V-T EDGE, HAC-V-T Rebar XTS

HSP Setting tool

Description

Setting tool for HSP/HFP drywall anchors

_{No technical data available}

6.8/11 DX 9 HSN M40 Powder cartridges

Description

Collated .27 caliber cartridges for use with stand-up powder-actuated nailers for fastening metal decks

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Cartridge type

.27 caliber short, 6.8/11 M40

Approvals

CE, CIP, PTB

HAS-V-36 Anchor rod (22.5 degrees pre-bent)

Description

High-performance pre-bent anchor rod for use in unreinforced masonry with HIT-HY 270 injectable adhesive anchor (carbon steel, ASTM F1554 grade 36, zinc-plated)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

Base materials

Masonry (multi wythe brick/unreinforced masonry)

Cleaning procedures

Compressed-Air Cleaning, Manual Cleaning

X-MC S 8/10 Steel marking stamps

Description

Sharp-tipped, wide letter and number characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

X-MC LS 8/10 Steel marking stamps

Description

Round-tipped, wide letter and number characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

X-MC S 5.6/10 Steel marking stamps

Description

Sharp-tipped, narrow letter and number characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

X-MC LS 5.6/6 Steel marking stamps

Description

Round-tipped, narrow letter and number characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

TE-CX (SDS Plus) Imperial hammer drill bit set

Description

Ultimate SDS Plus (TE-C) hammer drill bits sets with different bit diameters and lengths (imperial)

Connection end

TE-C (SDS Plus)

Base material

Reinforced concrete, Concrete, Brick, Masonry

Working mode

Hammer drilling

Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).

MFT-FOX H Washer

Description

Separate washer for MFT-FOX H

Height

25.3 mm

Length

19.6 mm

Material composition

EN AW-6063 T66

CF 812 WD low-pressure door and window foam

Description

Low-pressure foam for air-sealing, filling and insulating doors and windows without warping the frames or jambs

Foam Yield (up to)

1.3 ft³

Approx. tack free time (at 74°F / 50% rel. humidity)

10 min

Approx. cut time (at 23°C / 50% rel. Humidity)

15 min

KCM-WF Kwik Cast cast-in-place anchor

Description

Ultimate-performance multi-thread, cast-in-place threaded inserts for concrete on wood formwork with approvals

Approvals / Test reports

FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)

Base materials

Masonry (multi wythe brick/unreinforced masonry)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

Products in this group are generally suitable for seismic loading.

MF Threaded Standoff Adapter

ultimate

Description

Male-Female coated carbon steel threaded standoff for fastening to passive fire protection (PFP) coated steel beams

Point type

N/A

Base materials

Concrete

Corrosion protection

Duplex coating equivalent to 45 µm hot dipped galvanized

KCM-MD Kwik Cast cast-in-place anchor, long plate

Description

Ultimate-performance multi-thread long plate cast-in-place anchor for concrete on metal deck with approvals

Approvals / Test reports

FM (Factory Mutual), ICC-ES report (concrete), LABC, Seismic, UL (Underwriter Laboratories)

Base materials

Masonry (multi wythe brick/unreinforced masonry)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

X-MC 8 Steel marking stamps

Description

Sharp-tipped, wide special characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

X-MC 5.6 Steel marking stamps

Description

Sharp-tipped, narrow special characters for stamping identification markings onto metal

Application

Conduit Fastening, Cable Fastenings

For use with (tools)

BX 3, DX 351, DX 460, DX 5, DX 6, GX 3

Character type

Sharp

HAS-V-36 Anchor rod

Description

High-performance anchor rod for injectable hybrid/epoxy anchors (carbon steel, ASTM F1554 grade 36, zinc-plated)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

Base materials

Masonry (multi wythe brick/unreinforced masonry)

PROFIS Software

Yes

X-U MX Steel/concrete nails (collated)

premium

Description

High-performance collated nails for fastening to concrete and steel using powder-actuated tools

Base materials

Concrete

Minimum thickness of base material (concrete)

80 mm

Minimum thickness of base material (steel)

1/4 in

Sill plate fasteners

premium

Description

Single nails with washer for sill plate attachment on concrete using powder-actuated tools

Base materials

Concrete

Minimum thickness of base material (concrete)

80 mm

Environmental Conditions

Dry indoor

X-U P8 S Steel/concrete nails with washer

Description

High-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools

Base materials

Concrete

Minimum thickness of base material (concrete)

80 mm

Corrosion protection

Duplex coating equivalent to 45 µm hot dipped galvanized

MI-SGC M16

Description

Hot-dip galvanized (HDG) single beam clamp for connecting MI steel baseplates to steel beams

Material composition

Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-6 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8

Surface finish

HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461

Environmental conditions

Outdoor, low to moderate pollution (C3 / C4 - low)

T-handle X-NSD 1/4"

Description

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Additional Accessory Information

T-handle for tightening X-BT threaded studs

Torque tool X-BT 1/4" - 8Nm

Description

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Additional Accessory Information

T-handle for tightening X-BT threaded studs

MFT-OT Omega profile (3 mm)

Description

Omega support profile for façade panel substructures (3 mm material thickness)

Height

25.3 mm

Width

110 mm

Length

6000 mm

X-U P8 Steel/concrete nails

premium

Description

High-performance single nail for fastening to concrete and steel using powder-actuated tools

Base materials

Concrete

Minimum thickness of base material (concrete)

80 mm

Minimum thickness of base material (steel)

1/4 in

DD-SW-L Sealing washer

Description

Sealing for the DD-WC-ML water dam for core bit diameters from 24 mm (15/16") to 250 mm (9-13/16")

Accessory type

Sealing washers

For use with

DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA

HAS-V-36 HDG Anchor rod

Description

High-performance anchor rod for injectable hybrid/epoxy anchors (carbon steel, ASTM F1554 grade 36, hot-dip galvanized)

Material, corrosion

Carbon Steel, Hot-Dip Galvanized, Carbon steel, zinc-plated

Base materials

Masonry (multi wythe brick/unreinforced masonry)

PROFIS Software

Yes

CFS-TTS MD C FS Top Track Cover

Description

Firestop Preformed Solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop

Length

19.6 mm

Movement

Yes

Flame spread CAN/ULC-S102 (input)

This product provides seismic resistance.

CFS-TTS MD P FS Top Track Plug

Description

Firestop Preformed solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop

Movement

Yes

Flame spread CAN/ULC-S102 (input)

Smoke development CAN/ULC-S102 (input)

CFP-ES Endo-Shield

Description

High-temperature endothermic mat for passive fire protection of critical cable circuits, fuel lines, communication systems and many other MEP systems

Thickness

0.5 in

Weight

54.4 lb

Application temperature range

14 - 122 °F

CFS-TTS MD Firestop Top Track Seal

Description

Firestop Preformed solution for top-of-wall drywall joints under metal deck – eliminates the need for slow, messy stuff-and-spray firestop

Length

19.6 mm

Movement

Yes

Flame spread CAN/ULC-S102 (input)

CP- 506 Smoke and acoustic sealant

Description

Low-shrinkage and paintable smoke and acoustic sealant

Chemical basis

Water-based acrylic dispersion

Color

White

Shelf life

24 Months

X-DS Steel/concrete nails

Description

Universal fasteners for concrete

Base materials

Concrete

Minimum thickness of base material (steel)

1/4 in

Corrosion protection

Duplex coating equivalent to 45 µm hot dipped galvanized

X-ENP Metal deck fasteners

ultimate

Description

Single nail for fastening metal decks to steel structures with powder-actuated nailers

Base materials

Concrete

Minimum thickness of base material (steel)

1/4 in

Corrosion protection

Duplex coating equivalent to 45 µm hot dipped galvanized

DD-TBC P-U

Description

Threaded core bit barrel crowns

For use with (global)

n/a

Base materials

Concrete

Wet or dry operation

Wet

This product is designed for wet drilling.

_New

SB4 Band saw blade

_New

premium

Description

Premium band saw blade for low-noise cold cutting through metal and plastic

Base material

Reinforced concrete, Concrete, Brick, Masonry

Product Class

Premium

Low horsepower (up to 35hp) Asphalt over Concrete blade speed

Description

Premium Asphalt over Concrete blade designed for fast cutting on low horsepower saws

Tool type

Floor saw

Base material

Reinforced concrete, Concrete, Brick, Masonry

Arbor size

1 in

Fire Finish 120+ CFP-SP Steel protection spray

Description

High-finish, fiber-free, low-VOC intumescent fire protection spray for structural steel

LEED VOC

0 g/l

Approvals

CE, CIP, PTB

Base materials

Steel (with Approved Primer)

PBH S M1 Sharp-point drywall screws

Description

Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal

Screw head type

Bugle head

Screw drive/recess type

PH #2

Collated

Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine

X-BC-C P8 Rebar basket clip with nail

premium

Description

Basket clip with preassembled nail for fastening rebar baskets to road beds

Material

Carbon steel

Color

White

Application

Conduit Fastening, Cable Fastenings

SPX-L core bit (mm)

Description

Ultimate core bit for coring in all types of concrete – for <2.5 kW tools

For use with

DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA

For use with (global)

n/a

Base materials

Concrete

S-SLC/S-MD/S-RT Self-drilling framing and sidelap screws for SDT 9

Description

Collated self-drilling screws for use with the SDT 9 stand-up handle for sidelap and frame fastening

Screw drive/recess type

PH #2

Base materials

Concrete

Environmental Conditions

Dry indoor

Hilti's Perfect Sealing / Racing tip screws provide higher drilling speed, and unmatched sealing properties.

Screw set

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

Flange DST-FCA 1 3/8''/4 assy

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

For use with

DD 200, DD 250, DD 250-CA, DD 350-CA, DD 500-CA

Key DS-FCA

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

DS-FCA Flush-cutting flanges

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

DS-FCA Flush-cutting flanges

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

Flush cutting flange DS-FCA-110FF

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

Flush cutting flange set DS-FCA-110

Description

Flush-cutting flanges for the DST 10-CA, DST 20-CA, DS TS20-E and DS TS32/LP32 wall saws

Accessory type

Sealing washers

CP- 605 Bottom-of-wall firestop sealant

Description

Low-shrinkage and easy-to-dispense firestop sealant for fire-rated and non-rated bottom of walls

LEED VOC

0 g/l

Base materials

Steel (with Approved Primer)

Application temperature range

14 - 122 °F

This product provides high resistance to mold and mildew.

MW-C ceiling clip

Description

Multifunctional loop clamp for fastening MW wire rope suspension systems to any vertical, horizontal or sloped surface

Material composition

EN AW-6063 T66

Surface finish

Indoor Coated - Pre-galvanized

Environmental conditions

Outdoor, low to moderate pollution (C3 / C4 - low)

AC-D SPX Type 1 Cut-off wheel

ultimate

Description

Ultimate-performance Zirconium cut-off wheel for precise, low-vibration metalwork using an angle grinder – recommended for stainless steel

Product Class

Premium

Base material

Reinforced concrete, Concrete, Brick, Masonry

Tool type

Floor saw

_New

SB6 Band saw blade

_New

premium

Description

Premium blade for low-noise, cold cutting through metal and plastic using SB 6-22 deep cut band saws

Base material

Reinforced concrete, Concrete, Brick, Masonry

Product Class

Premium

PBH S HI/LO M1 Sharp-point drywall screws

Description

Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to wood or metal

Screw head type

Bugle head

Screw drive/recess type

PH #2

Collated

Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine

_New

Magnetic ground clamp X-MC F3

_New

Description

Magnetic ground clamp (X-MC F3) and ground cable (X-GC F3) help close the electrical circuit during stud fusion

_{No technical data available}

PBH SD M1 Self-drilling drywall screws

Description

Collated drywall screw (phosphate-coated) for the SD-M 1 or SD-M 2 screw magazine – for fastening drywall boards to metal

Screw head type

Bugle head

Screw drive/recess type

PH #2

Collated

Yes, compatible with SD-M 1 screw magazine, Yes, compatible with SD-M 2 screw magazine

Showing 301 - 360 of 819 Products